Ratchet stop for consistent and repetitive measurements.125″ or|.157″ dia. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory|The rod length can be adjusted, to compensate wear on the measuring tip, with two supplied wrenches|Crisp clear graduations on the thimble. .001″ graduations on Vernier, .00005″ on Electronic.
Shown 0-4″ Vernier Depth Micrometer with 2-1/2″ base.
Shown Starrett Blade depth Micrometer with 2-1/2″ Base (4″ available). Available in 0-3″ or 0-6″ depth range
Depth Groove rods (shown here) are available for most rod type Depth Micrometers. Available 0-3″, 0-6″, 0-9″ and 0-12″. Call for details (818) 248-4783.
Depth Gages are available as Slide Type or Dial Indicator Type:
Slide Type are offered in Vernier, Dial or Electronic. They come in a variety of lengths from 0-6″ to 0-40″. Depth extension bases are available: 7″, 10 and 12″. Depth Gages with a Hook End are available in Vernier or Electronic. Dial and Vernier Type are graduated in .001″ and Electronic have a resolution of .0005″.
Shown Electronic Depth Gage available from 0-40″
Dial Depth Gages: Consist of a base and a indicator – either Dial or Electronic. They can be graduated in .001″ .0005″, .0001″ or .00005″. The base is either 2-1/2″ or 4″ long. They can be fixed to measure one specific size or can be interchangeable anvil type from 0-8″. The contact point can be changed to measure almost any feature inside a groove, hole or cavity.
Shown Dial Depth Gage